Naxos Sculptor Marble Hill
Call for price
Sculptor Marble Hill is a Calacatta look that is available in a floor and wall tile combination. Using the latest inkjet technology, Naxos has created a shade that is both warm and classic. Sculptor Marble Hil has timeless appeal making it ideal for any installation. Suitable for residential and commercial installations.
Rectified white body, shiny finish.
Wall Tile is intended for interior walls. If installing with a cement-based adhesive, we recommend using a flexible setting material. All substrates should be properly reinforced to be sure there is no movement. For mortar installations, the mortar bed has to be cured (less than 2% humidity) and has to have proper reinforcing
Wall Tile Trim
The surface bullnose is made from field that is cut, ground and then reglazed.
Porcelain Floor & Wall Sizes
Rectified glazed porcelain with a matte finish.
Mounted on approximately square foot sheets
Porcelain Floor & Wall Trim
The surface bullnose is made from field that is cut, ground and reglazed.
Most Italian manufactures recommend a maximum offset of 8” (20cm) on all large format tiles when setting large format tiles, ANSI A 108.2 Section 4.3.8. There are special setting requirements and materials for large format tiles. Please refer to the TCNA Handbook and guidelines by your mortar manufacturer for more information.
|Wall Tile Sizes – Shiny|
|NSMHSRW/820||8 x 20|
|NSMHSRW/1326||13 x 26|
|Wall Tile Trim|
|NSMHSRW/SBN||3 x 13 Surface Bullnose|
|NSMHSRW/A113||13” Quarter Round|
|Porcelain Floor & Wall Sizes – Matte|
|NSMHSRF/1212||12 x 12|
|NSMHSRF/1224||12 x 24|
|NSMHSRF/22||2 x 2 Mosaic|
|Porcelain Floor & Wall Trim|
|NSMHSRF/SBN||3 x 12 Surface Bullnose|
|NSMHSRF/A112||12” Quarter Round|